Zirocco
Zirocco Jet Dryer and Cleaner
by Applied Turbine Technologies
Skip-Line is the exclusive US* distributor for Zirocco
*excluding CA
Zirocco Jet Dryers are the most effective solution for drying and cleaning surfaces at airports, on roads, bridges and other areas before the completion of crack repair/joint sealing, road/line marking, road safety tape application and asphalt paving. Zirocco products can extend the number of operating days for your marking and surface repair equipment, which enables you to finish the work faster with up to 16,000 square feet of drying per hour with the M-100 unit. Zirocco units can be easily transported to any job site and have no open flame. In addition, online telematics make it easy to track location and manage preventative maintenance.
Available units include the following:
The Zirocco is the most effective solution for drying and cleaning surfaces at airports, on roads, bridges and other areas before the completion of crack repair/joint sealing, road/line marking, road safety tape application and asphalt paving.
The Zirocco can extend the number of operating days for your marking and surface repair equipment, which enables you to finish the work much faster and to the satisfaction of your clients.
See Brochure
Zirocco-M100
Road/surface dryer & cleaner
The ultimate dryer and cleaner for companies conducting paving line marking, tape removal, waterproofing and crack repair.
Zirocco-M100 is based on turbine technology and the world leading road/surface dryer and cleaner. The turbine A100 is the most powerful diesel driven turbine, which enables drying and cleaning widths from 11.81-47.24 inches at speed up to 3.73 mph.
The durable, rugged and ergonomic design with the use of industrial products ensures easy and user friendly operation and monitoring.
The Zirocco-M100 turbine generator ensures constant charging of the 12V battery.
The turbine service intervals are 100 hours for optimal performance and expected turbine lifetime of app. 1500 hours. The turbine module can be replaced in few minutes.
ATT Telematics system is enabling remote diagnostics, utilization reports and tracking.
Zirocco-M50
Road/surface dryer & cleaner
The perfect dryer and cleaner for companies conducting line marking, tape removal and crack repair.
Due to the low noise level of 96 dB the Zirocco-M50 is also perfect for work in cities.
The affordable, compact and effective unit with the turbine A50, enables approximately 6 inch width surface drying at speeds up to 1.8 mph. The average fuel consumption is only 3.17 gallons per hour(more than 2 hours on a fuel tank).
The Zirocco-M50 offers many of the same advantages as of our well-known Zirocco-M100 including our high-end Telematics system. The Zirocco-M50 chassis is delivered with another inlet air filter, and without the towbar (accessory) for line drivers, but is compatible with the A100 turbine from the Zirocco-M100, hence wider drying width, than 11.81 inches can be obtained via an easy upgrade of the turbine module.
The turbine service intervals are 100 hours for optimal performance and expected turbine lifetime of app. 1500 hours. The turbine module can be replaced in few minutes.
Zirocco-T
Truck mounted – complete drying and painting in one step
The ultimate dryer and cleaner for companies utilizing trucks or self-propelled vehicles for line marking. With the Zirocco-T installed on the truck or self-propelled unit, the drying, cleaning and line painting can be completed in one step.
Zirocco-T is based on turbine technology and the world leading road/surface dryer and cleaner. The turbine A100 is the most powerful diesel driven turbine, which enables drying and cleaning at speed up to 3.7 mph .
The Zirocco-T is delivered with an electronic actuator for vertical adjustment of the drying and cleaning height during operation.
The durable, rugged design with the use of industrial products including a cabled display box, ensures easy and user friendly operation and monitoring. The unit is delivered with 3-5m fuel and power cables (12V).
The turbine service intervals are 100 hours for optimal performance and expected turbine lifetime of app. 1500 hours. The turbine module can be replaced in few minutes.
ATT Telematics system is enabling remote diagnostics, utilization reports and tracking
Hammer Jet
The world’s smallest and most versatile jet turbine dryer, cleaner and heater. The lightweight and compact design makes it easy to always have on site for many tasks within different industries. The Hammer Jet is easy to operate both on wheels, or handheld with a shoulder harness.
The affordable and compact unit with the durable jet turbine A50H, enables approximately 6 inches width drying and cleaning at speeds up to 1.5 mph. Various and replaceable nozzles enable optimal utilization for drying, cleaning and heating tasks.
The turbine service intervals are 50 hours for optimal performance and expected turbine lifetime of app. 1500 hours. The turbine can be replaced in few minutes.
The world´s only multi-purpose jet dryer
Line marking – drying and cleaning prior to smaller marking jobs at car parks, roads, runways and aprons
Roof top waterproofing - drying of the roof top concrete prior to waterproofing
Crack repair and joint sealing - drying and cleaning prior to sealing
Roofing felt heating – heating of the felt and surfaces with non-flammable hot air
Tape removal – heating of the tape adhesive for easier removal
Railroad switch de-icing – quick heating and cleaning of the switches with non-flammable hot air
Product Specifications
Turbine module: A100 (Change to A50 turbine module is possible)
Airflow: 100 m³ per minute
Temperature: App. 662-896°F
Weight: 265 lbs /333 lbs with fuel
Drying width: 12-47 inch – delivered with 12 inch
Drying speed: Up to 3.6 mph
Start-up time: App. 60 sec
Fuel: Standard Diesel EN 590 + 5% ATT Turbine Oil
Fuel tank capacity: 8.2 US Gallons
Fuel consumption: 7-9 US Gallons/hour
Generator: Yes – Battery charges when using the machine
Towbar for Line Drivers: Yes
No. of air filters required: 2
Noise level: 108 dB, at full power
Telematics: Yes
Maintenance: Service Check
Turbine module: A50 (upgrade to A100 turbine module is possible)
Airflow: 50 m³ per minute
Temperature: App. 662-896°F
Weight: 253 lbs /321 lbs with fuel
Drying width: 6-12 inch – delivered with 6 inch nozzle
Drying speed: Up to 1.8 mph
Start-up time: App. 15 sec
Fuel: Standard Diesel EN 590 + 5% ATT Turbine Oil
Fuel tank capacity: 8.2 US Gallons
Fuel consumption: 3-4 US Gallons/hour
Generator: No – Frequent charging required
Towbar for Line drivers: No – Accessory
No. of air filters required: 1
Noise level: 96 dB, at full power
Telematics: Yes
Maintenance: Service Check
Turbine module: A100
Airflow: 100 m³ per minute
Temperature: App. 662-896°F
Weight: 253 lbs /321 lbs with fuel
Drying width: 12-47 inch – delivered with 12 inch nozzle
Drying speed: Up to 3.6 mph
Start-up time: App. 60 sec
Fuel: Standard Diesel EN 590 + 5% ATT Turbine Oil
Fuel tank capacity: Various solutions depending on demands
Fuel consumption: 7-9 US Gallons/hour
Generator: Yes – Battery charges when using the machine
Electrical elevation: Yes, up to 30 cm for optimal drying and cleaning height
No. of air filters required: 1
Noise level: 108 dB, at full power
Telematics: Yes
Maintenance: Service Check
Turbine module: A50H
Airflow:App. 50 m³ per minute at 100% (100.000 RPM)
Temperature: App. 662-896°F
Weight incl fuel: App. 35 lbs without wheels/ 43 lbs with wheels
Drying width: 2-8 inch – delivered with 6 inch nozzle
Drying speed: Up to 1.5 mph
Dimensions: H: 54 inch W: 14.5 inch
Start-up time: App. 15 sec
Fuel: Exxsol D80 or Shellsol D70 petroleum/Kerosene + 3% ATT Turbine Oil
Fuel tank capacity: 1 Gallon
Fuel consumption: 3-4 US Gallons/hour
Generator: No – frequent charging required after app. 10-15 starts
Battery: Li-Po 11,1 V, 4500 mAh
Display indication: Voltage level, nozzle temperature, airflow level, operation hours
Handheld operation: Removable wheels for handheld operation with shoulder harness
No. of air filters required: 1 pcs. custom fit filter
Nozzle replacement: Various nozzles for relevant tasks – change only takes few minutes
Noise level: 108 dB, at full power
Telematics: No
Maintenance: Service Check